Mirror work 2

I’ve created this mirror/shisha work out of flower stitch 2.

This mirrorwork is my own creation.You are not allowed to copy the tutorial and produce it as your own whether on print or electronic media, on your blog or youtube channels.You are allowed to show the finished work but please link back to this page for the tutorial.

Divide a 4cm diameter circle into 12.Transfer the 12 points onto the fabric.Draw straight lines connecting 2 opposite points and passing through the center.Draw more lines to form a star.Place the mirror (I’ve used a 1.25cm diameter mirror) in the middle and fix it with 4 straight and 4 diagonal stitches as shown (it is better to first fix the mirror with fabric glue).

These are the points on each petal.

Bring the needle up at the point shown (near A).

Bring the needle under the foundation stitch and pull through.

Bring the needle under the foundation stitch again but don’t pull through the needle yet.

Take a small stitch and bring the needle up at A and wrap the thread under the needle.

Pull through (it is important to use the same tension here, all around the mirror to produce beautiful, rounded center).

Go back into A and come up at B, wrap thread under the needle and pull through.

Enter at point C.

Come up at the point below D.Bring the needle under the foundation stitch.Pull through.

Go back under the foundation stitch.Without pulling through, take a small stitch and come up at D.Wrap the thred under the needle and pull through.

Repeat DE as in AB and enter fabric at C.

Continue in the same manner for the last part of the petal.

This is the stitch, done half-way.

The completed mirror work.

To learn how this is stitched without mirror, please click here.

Flower stitch 2

The flower made with this stitch is bigger compared to the previous one (Flower stitch ) but the method is almost the same.

This flower design is my own creation.You are not allowed to copy the tutorial and produce it as your own whether on print or electronic media, on your blog or youtube channels.You are allowed to show the finished work but please link back to this page for the tutorial.

Divide a 4cm diameter circle into 12.Transfer the 12 points onto the fabric.Draw a small circle in the middle of this circle (just big enough to fit in a sequin).draw straight lines connecting 2 opposite points and passing through the center of the circle.Draw more lines to form a star.

These are the points on each petal.

Bring up the needle at A.Pull through.Go back into A and bring the needle up at B.Wrap the thread under the needle and pull through.

Go back into B, come up at C, wrap thread under the needle and pull through.

Enter the fabric at D.

Repeat the same for AE à EF à FD.

This is the final part of the petal.

Continue in the same manner for the other petals.

Decorate the center with a sequin, stone or beads.

This stitch can also be done on a mirror.The tutorial is here.

Flower stitch

The following stitch could be used to embroider small flowers. Each petal consists of 3 lazy daisies stitched close to each other.

Embroider the first lazy daisy, on the left.

Rather than holding down the loop on the same point, enter the fabric at point A (this will be the tip of the flower).

Stitch another lazy daisy in the middle and enter at the same point, A.

This is the last stitch and one petal is made.

This is how the flower looks like. Each petal measures less than 1cm in length.

Free pattern 1 - Underwater scene

This is the completed underwater scene pattern.

As you can see, this is only a simple pattern, measuring 10”x 10”. I just wanted to show the endless ways you could use buttonhole knots to create beautiful embroidery.

Please follow these links for step-by-step instructions:

  Step 1 – Plants

Step 2 – Starfish

Step 3 – Coral 1

Step 4-Coral 2

Step 5- Fish 1

Step 6-Jellyfish

Step 7-Fish 2

Step 8-Seahorse

                                                                  

                                              

Underwater scene 8

For the last sea creature for this underwater scene embroidery, my choice is a seahorse. For this, I’ve used pearl cotton no:8 thread.

I began at the tip of the tail. Here, I,ve made 2 rows of buttonhole/blanket stitch.

Then, slightly above the stitch, I made a horizontal bar (straight stitch). Work buttonhole knots on this bar, facing downwards. Continue making another bar and fill it with buttonhole knots. The bar in the picture is the third one.

Filled with buttonhole knots.

Here, I’ve almost completed the tail. That is the last bar. For the tip of the tail, I,ve used only one strand for the bars and buttonhole knots. As the tail became wider, I use 2 strands for both. At the end of the buttonhole knots on each bar, enter the fabric at a point a bit further to give the skin a spiked look. The fin was done with buttonhole/blanket stitch and a straight stitch for the mouth.

As you can see here, I’ve filled the stitches with buttonhole knots. For the fin, please refer frilled buttonhole stitch.

The body was divided into 3 parts. The first part has been filled the same way as the tail (2 strands). Work from bottom to top.

The second part has also been filled.

And, this is the final part. This fellow is my favourite.

I,ve come to the end of this underwater scene embroidery. I’ll show you the full pattern in my next post since I’ll have to stitch some more of the tiny fish that I’ve shown in my last post. From time to time, I’ll try to embroider more sea creatures.

To view completed pattern, please click here.

Underwater scene 7

Today, I,m going to embroider another fish – smaller than the previous one.

For the head and body, I’ve used one strand from the 6-strand floss. Satin stitch for the head and long and short stitch for the body. I’ve also made 2 straight stitches at the bottom of the body for the fins (6 strands). The tail is buttonhole/blanket stitch (2 strands).

Here, I’ve covered the fins with buttonhole knots (3 strands) and worked buttonhole knots on the tail (2 strands). (Please refer frilled buttonhole stitch). Embroider tiny fly stitches (2 strands), close to each other for the fin at the top of the body. And, 2 curved lines on the body for the stripes (6 strands).

Work buttonhole knots on the curved lines and tiny googly eye to complete this fish. I’ll have to embroider a few more to show them swimming in a group.

I’m nearing the end of my underwater scene project. There’s still one more sea creature left. Can you guess what it is?

To view completed pattern, please click here.

Underwater scene 6

If you’re wondering why I haven’t posted for quite a while – the reason is I’ve been spending more time with my son. As a stay-at-home single mom who works from home on my computer, I was always busy. Since we live in a farmhouse,there’s always one work or another. If he had noone to play with, my son would be glued in front of the T.V. or engrossed in his computer games. Although we lived under the same roof, we were in different worlds. Nowadays, I make it a point to spend more time with him. Rather than cooping up inside the house, I take him outdoors, cycling, watching our cow grazing, birds making nests, peacock’s dance or just take a walk in this beautiful countryside, enjoying the lovely sunrise, sunset, moon and stars.

For this to happen, I finish all my chores before he returns from school. I encourage him to go out and meet people. Slowly, he’s building his self-confidence. He enjoys the outdoors more than indoors. When he has noone to play with, I’ll join him. Normally, I would do my shopping and pay my bills when he was at school. But, nowadays I take him wherever I go. My advice to all mothers out there – be there for your children, not only physically but also mentally. Expose them to the outside world – take them to gatherings, weddings, funerals etc. Let them mingle with other children, rich or poor. Take a public transport with your children just for the fun of it – they will enjoy meeting people. Start all this at a young age. Believe me, I’ve seen the difference in my son in a very short period (one month). Not only that, I’m beginning to feel the difference in my life, as well.

That’s my real world. Now to my virtual world – blogging. These days, I embroider only when he’s at school. To fill a vacant spot in my underwatwe scene, I’ve decided to stitch a jellyfish, though it wasn’t my favourite choice.

I started with the tentacles. I’ve made running stitch on each tentacle and then inserted one strand of pearl cotton no:8 thread into the stitch.

Here, I’ve made buttonhole knots on the thread with one strand from the six-strand thread. Work buttonhole/blanket stitch at the bottom of the body (pearl cotton no:8).Sorry for the quality of the picture.

With one strand of pearl cotton, work buttonhole knots on the buttonhole/blanket stitch (please refer frilled buttonhole stitch). Stitch horizontal bars on the body, as shown.

Bring the needle up at the top of the body, insert the needle under the first bar and pull the thread.

Continue downwards. This stitch is called ‘chebron stem filling stitch’. When you reach the bottom, enter the fabric.

To continue, come back at the top and repeat the process. After completing 2 columns at the left, I’ve decided to fill the right side. Please note the position of the needle.

This is the stitch in progress. Alternate between left and right. For convenience, use 2 sets of needle and thread.

Here, the body is halfway filled. As the whole top has been filled, bring the needle up at the position shown and continue to fill.

The whole body has been filled up. There’s a slight difference in the shades of white since 2 different types of threads were used.

To view completed pattern, please click here.